FAQFAQ   ZoekenZoeken   RegistrerenRegistreren 

ADFS strange behavior

 
Nieuw onderwerp plaatsen   Reageren    flyengravity.com - build your own jetliner Forumindex -> Electronics
Vorige onderwerp :: Volgende onderwerp  
Auteur Bericht
agusti747

BerichtGeplaatst: Di Apr 23, 2013 10:27 am    Onderwerp: ADFS strange behavior Reageren met citaat

Hi all,

I'm having some strange behavior with F/O AFDS.

I've both AFDS, Captain & F/O sides, connected to CPFlight board.

If I make a test, red and amber leds works fine in both sides (Except FMC wich only have amber colour). Until here, all works fine.

When I starts FSX, all remains works OK, but when I starts GEN2 switch in overhead, ADFS F/O begins to malfunction and A/P and A/T amber leds bright (And speedbrake bright too, but only a few).
Issue appears only in ADFS F/O side. Captain ADFS seems to work OK.
This malfunction remains until I close FSX or restart computer.

Yesterday I try to change power supply, until now with daisy chain.
I added an external power suply (DC 11V/900mA) changing jumper in CPFligh board, as indicated in manual, but the issue remains.

Wiring is OK. I revised all < lot of times, and test works fine.

Poer of F/O ADFS module comes from Captains ADFS module, joining two positives and two negatives. (Pins 1&2 from right side, 1 positive and 2 negative, as indicated in manual)

I'm using FSX and Prosim737

Can anybody help me?

Thanks,
Austin
Terug naar boven
Profiel bekijken Stuur privébericht
agusti747

BerichtGeplaatst: Di Apr 23, 2013 10:44 am    Onderwerp: Reageren met citaat

CORRECTION:

When malfunction appears, It remains until I close Prosim737 main module.
It's not necessary to close FSX or restart PC as I indicated in my first post.

Regards,
Austin
Terug naar boven
Profiel bekijken Stuur privébericht
Engravity_Support
Site Admin

nl.gif

BerichtGeplaatst: Wo Apr 24, 2013 11:09 pm    Onderwerp: Reageren met citaat

the afds module itselve does not contain any logics, so i would first look at the interface or the software.

can you check softwarewise in prosim what state the leds should be in ?

can you exchange the module's ? (ie disconnect both afds modules and interface the first officer module as the captains module (single module)) and see if it works correctly now ?
This way we can check if its a faulty module
_________________
www.flyengravity.com
Build your own jetliner
Terug naar boven
Profiel bekijken Stuur privébericht
Berichten van afgelopen:   
Nieuw onderwerp plaatsen   Reageren    flyengravity.com - build your own jetliner Forumindex -> Electronics Tijden zijn in GMT + 2 uur
Pagina 1 van 1

 
Ga naar:  
Je mag geen nieuwe onderwerpen plaatsen in dit subforum
Je mag geen reacties plaatsen in dit subforum
Je mag je berichten niet bewerken in dit subforum
Je mag je berichten niet verwijderen in dit subforum
Je mag niet stemmen in polls in dit subforum


Powered by Inforaction internet services. Based on phpBB © 2001, 2005 phpBB Group