FAQFAQ   ZoekenZoeken   RegistrerenRegistreren 

AFDS and FDS-SYS4X problem

 
Nieuw onderwerp plaatsen   Reageren    flyengravity.com - build your own jetliner Forumindex -> Electronics
Vorige onderwerp :: Volgende onderwerp  
Auteur Bericht
assrar
Flight Captain

BerichtGeplaatst: Di Jun 04, 2013 11:12 pm    Onderwerp: AFDS and FDS-SYS4X problem Reageren met citaat

Hello my Dears

I have AFDS and FDS-SYS4X frome Flightdeck the software is prosim i did the wiring as Mr.Stef says but the lights does not goes on at all anybody has a solution. Question
Thanks

Best Regards
assrar
Terug naar boven
Profiel bekijken Stuur privébericht
assrar
Flight Captain

BerichtGeplaatst: Vr Jun 07, 2013 9:26 am    Onderwerp: Reageren met citaat

Hi Mr.Stef,

This is what your email says,



Hello -------------,

If i understand your picture right you want to know where the connection with the red arrow goes ?

This is the common ground for the A/P, A/T and FMC switches.

A/P, A/T and FMC go to a input of the SYS card and the COM goes toe the common ground that these inputs share on the SYS card.

(inputs of the syscard share their return line (the common ground), i believe in groups of 8. The common of the syscard is colour coded on the supplied cables of the sys card (the inputs all have the same color, the common ground has a different color))

The questionmark goes to the common for the leds on the board you use (common cathode is used on the afds module) and the first 2 connections go to a 12 volt line. (the afds module needs its own 12 volt line)

This is basically the same answer i gave you in the forum in march. you do not need any more info.

Best regards,

Stef ---------------

Engravity Support

-------------------------------------------------------------------------------------

and this is what i did but nothing works well what should i do in this case?



Thank you
assrar
Terug naar boven
Profiel bekijken Stuur privébericht
Engravity_Support
Site Admin

nl.gif

BerichtGeplaatst: Vr Jun 07, 2013 10:30 am    Onderwerp: Reageren met citaat

but where do you connect 6, 7, 8, 9 and 11 on the sysboard ?
_________________
www.flyengravity.com
Build your own jetliner
Terug naar boven
Profiel bekijken Stuur privébericht
assrar
Flight Captain

BerichtGeplaatst: Vr Jun 07, 2013 10:56 am    Onderwerp: Reageren met citaat

Hi,

To the input in the sysboard as common anode

assrar
Terug naar boven
Profiel bekijken Stuur privébericht
assrar
Flight Captain

BerichtGeplaatst: Vr Jun 07, 2013 10:59 am    Onderwerp: Reageren met citaat

Hi

I connect 6, 7, 8, 9 and 11 to 16 on the sysboard .



assrar
Terug naar boven
Profiel bekijken Stuur privébericht
Engravity_Support
Site Admin

nl.gif

BerichtGeplaatst: Zo Jun 09, 2013 12:14 pm    Onderwerp: Reageren met citaat

assrar schreef:
Hi,

To the input in the sysboard as common anode

assrar



There are no common anode's !
6, 7, 8, 9, 11 from your picture are individual anodes,
16 is the common cathode

Also, they should NOT be connected as inputs, but to the OUTPUTS of the sysboard. Inputs are for switches.


[/b]
_________________
www.flyengravity.com
Build your own jetliner
Terug naar boven
Profiel bekijken Stuur privébericht
assrar
Flight Captain

BerichtGeplaatst: Zo Jun 09, 2013 10:30 pm    Onderwerp: Reageren met citaat

Hi
I Just made a mistake in the typing words Very Happy , you are right they are 8 individual anodes and 1 common cathode.
and i did exactly as you said 6, 7, 8, 9 and 11 are individual anodes and 16 is common cathode. Shocked

assrar
Terug naar boven
Profiel bekijken Stuur privébericht
Engravity_Support
Site Admin

nl.gif

BerichtGeplaatst: Zo Jun 09, 2013 11:16 pm    Onderwerp: Reageren met citaat

drop robert an e-mail to the adress i mentioned earlier.

We will have it exchanged.
_________________
www.flyengravity.com
Build your own jetliner
Terug naar boven
Profiel bekijken Stuur privébericht
assrar
Flight Captain

BerichtGeplaatst: Ma Jun 10, 2013 12:27 pm    Onderwerp: Reageren met citaat

Hi,

I sent to him email i hope he answer it.

Thanks
assrar
Terug naar boven
Profiel bekijken Stuur privébericht
Berichten van afgelopen:   
Nieuw onderwerp plaatsen   Reageren    flyengravity.com - build your own jetliner Forumindex -> Electronics Tijden zijn in GMT + 2 uur
Pagina 1 van 1

 
Ga naar:  
Je mag geen nieuwe onderwerpen plaatsen in dit subforum
Je mag geen reacties plaatsen in dit subforum
Je mag je berichten niet bewerken in dit subforum
Je mag je berichten niet verwijderen in dit subforum
Je mag niet stemmen in polls in dit subforum


Powered by Inforaction internet services. Based on phpBB © 2001, 2005 phpBB Group