FAQFAQ   ZoekenZoeken   RegistrerenRegistreren 

Fire&Master caution need help

 
Nieuw onderwerp plaatsen   Reageren    flyengravity.com - build your own jetliner Forumindex -> Electronics
Vorige onderwerp :: Volgende onderwerp  
Auteur Bericht
simpson-uk
Flight Captain

lu.gif

BerichtGeplaatst: Ma Nov 25, 2013 12:24 pm    Onderwerp: Fire&Master caution need help Reageren met citaat

Hi fellow pilot's,
I have a BIG problem of the cabling with fires and Master caution,and the MIP Board,The diagram here is which I have but I do not manage to run 2 Master knowing that I have only 2 threads to connect.



As you can see, on the blue index, we can see number's which correspond to the location of the various actions of the LED and Switch

My diagram:

Pilot switch:
6=thread brown= slot 6(on MIP Board) common = OK
5=thread red=slot 4 (on MIP Board) Master = OK
4=tread orange=slot 5 (on MIP Board) fire = OK

Pilot LED:
3=thread yellow=slot 9 (on MIP Board) Master = ....... Evil or Very Mad
2=thread green=slot 1(on MIP Board) Common = OK
1=thread blue=slot 10 (on MIP Board) Fire = OK

Copilot Switch:
6 thread blue = slot 59(on MIP Board) Common = OK
5 thread green = slot 57 (on MIP Board) Master = OK
4 thread yellow = slot 58 (on MIP Board) Fire = OK

Copilot LED :
3 thread orange = slot 59 (on MIP Board) Master = ..... Evil or Very Mad
2 thread red = slot 51 (on MIP Board) Common = OK
1 thread brown = slot 60 (on MIP Board) Fire = OK
..............................................................................................................................................................
..............................................................................................................................................................


Here the diagram from F-Engravity:

the 2 outer pins of the 4 pin terminal on the switch go to:
captains side:
6 for the common
5 for the fire warn switch
4 for master caution.
so of the 2 switches on wire goes to 6 (for both switches, since its a common) and the other wire goes to 4, respectively 5.

F/O side:
59 for the common
58 for the fire warn switch
57 for the master caution switch.
the 2 pin terminal is for the led, please mind the polarity (is depicted on a sticker on the side).

captains side:
1/2 both common cathode
pin 9 anode master caution
pin 10 anode fire warn.

F/O side:
51/52 both common cathode
pin 59 anode master caution
pin 60 anode fire warn

When I try F-Engravity solution nothing works ?

But when I connect them (2 master's), and when I press the fire, on fire lights(switches on) at the same time light the Master and fire captain side, and only fire on F/O side.
I do not know where is my error, but I shall like a little help from you.

I do not know if my explanation is rather clear, I wait for your answers and certainly for your good ideas, which can take out me from there.

PS: I know i've to connect my brain Very Happy to find the good way

Jeff
Terug naar boven
Profiel bekijken Stuur privébericht
Berichten van afgelopen:   
Nieuw onderwerp plaatsen   Reageren    flyengravity.com - build your own jetliner Forumindex -> Electronics Tijden zijn in GMT + 2 uur
Pagina 1 van 1

 
Ga naar:  
Je mag geen nieuwe onderwerpen plaatsen in dit subforum
Je mag geen reacties plaatsen in dit subforum
Je mag je berichten niet bewerken in dit subforum
Je mag je berichten niet verwijderen in dit subforum
Je mag niet stemmen in polls in dit subforum


Powered by Inforaction internet services. Based on phpBB © 2001, 2005 phpBB Group